Wood stain remover is toxic. Wear a face mask, google, and gloves while using it. If you’re working indoors, make sure the room is ventilated, as the remover’s fumes are strong.

The stripper is water-based and odor-free, with no VOC’s. It is biodegradable and pH neutral, so you want have to follow up on the application with a wood neutralizer. The formula is safe for the environment, containing no toxic substances. It is safer for you and your family to use, being noncarcinogenic and noncaustic. The manufacturers of this product state it will remove up to 15 layers of paint in one application. If your wood stain remover consists of potent chemicals, it could be hazardous to both you and your family’s health. Look for a wood stain remover that’s safe for indoor use if you’ll be using it inside your home. Cover and protect everything you do not wish to strip or clean, including plants, shrubs and any aluminium surfaces. You can use many products to remove these stains, from vinegar to bleach. Just remember never to mix chemicals when cleaning, even when you’re outdoors.In case you've never used a bar stain remover, the instructions were clear and the shape of the bar made it easy to apply. It did create a lot of lather, so the formula could easily spread out of the stain. Caustic wood stain removers work by dissolving the finish and converting it into another substance. They usually consist of strong bases, which are corrosive. After the remover has swelled or bubbled up, scrape off the finish with a plastic scraper or a putty knife. Use gentle force, and try to scrape the finish into a trash can.

For an effective stain remover that doubles as a "stink remover," too, look no further than HEX. The cleaner has a slight lemon scent that nicely covered up the normal chemical smell that cleaners typically have. The product itself is noted as fragrance-free, containing no added fragrances. The scent comes from the formula itself, which also happens to be biodegradable and cruelty-free. Rinse with copious amounts of freshwater, using the highest pressure from the water source available or use a Power Washer at 500-1000 psi (35-70 bars) working in direction of grain. (Rinse adjacent areas at same time). Because of the nature of Owatrol products, you will not need to strip the coating off year after year, but instead you will simply need to give the wood a clean and then give it a few touch ups in the effected areas – perhaps only once a year. Plus, it's a cinch to use, though the process can be a bit messy in comparison to any spray you might use. All bar applications are a little messier than just spraying something on, but one good part of that is there is no plastic bottle! As for its performance, the bar was very strong across multiple categories, including ease of use, effectiveness, and scent. When it comes to price, it's key to note that this one is more expensive, but also worth the splurge, given the results. It also has a light, pleasant scented. No matter which application method you go with, keep the advice of Cohoon in mind. When using an oxygen-based cleaner, in particular, look for "at least 20 percent" of your ingredients to be peroxide or another suitable oxidation agent, since that's ultimately what will treat your stain and help remove it.If you have handheld sandpaper, the method is the same. Wipe the wood surface with a damp cloth to eliminate the dust particles. After completing the power washing process, take a garden hose and rinse off the entire surface again and make sure there is no more chemical left on the surface. Also, make sure the surrounding surfaces are clean of any stripped finishes and dirt. Sunnyside 2-minute Remover comes in liquid and gel form. The newly formulated solution is methylene chloride-free and will remove more than one layer of finish with a thin layer of application. It’s ideal if you need to remove a layer of polyurethane or shellac on your wood surfaces. You can use it on wood, metal, and even automotive finishes.